Arc'teryx Acrux AR Boot | Review - Outdoors Magic

Outdoors Gear, Equipment, News, Reviews, Forums, Walking Routes and More at OutdoorsMagic.com

Share

Walking Boots

Arc’teryx Acrux AR Boot | Review

We take a closer look at the revolutionary new lightweight double mountaineering boot from the Canadian product engineers.

Historically (mostly) plastic double boots had a lot of pros: they were warm, rigid and could be dried out easily by simply removing the foam inner boot and sharing your sleeping bag with it. There were plenty of downsides too, plastic boots tended to be heavy, clumsy, not particularly breathable and horribly bulky.

As a result, for lower altitude mountaineering, they’ve tended to be replaced by lighter, more nimble, single boots. Not as warm or easy to dry out, but lighter, more comfortable and generally neater and more precise on technical terrain.

What If…

But what if you could make a boot with all the traditional double boot virtues, but with the same sort of weight and precision as a lightweight single mountaineering boot? That’s pretty much what Arc’teryx has done with the new Acrux AR.

Outwardly it looks very similar to a lightweight single boot with an integral gaiter like the Scarpa Phantom series, but the difference is that inside the Gore-Tex covered is a Gore-Tex-based – again – Adaptive Fit liner that can be removed for quick drying and to be used as a hut slipper.

Despite that double construction, the new boot is at 960g per foot (size 43) lighter than an original Scarpa Phantom Guide and pretty much identical in terms of size and bulk.

Three Layers

Want more details? The boot has three distinct layers: on the outside there’s that Gore-Tex integrated gaiter with lightweight rand put together using Arc’teryx laminating technology and bonded to a rigid Vibram sole incorporating reinforced ledges for clip-on crampon attachment.

The gaiter uses a waterproof T-ZIP, same as the Scarpa, with a press-stud closure up top. Next layer in is an insulated shell boot made from dense PE foam with a combination of conventional laces and a Velcro-fastened top strap. It feels supportive, but also surprisingly flexible in the ankle.

Stretchy Inner

Finally, the inner boot, like those in other Arc’teryx footwear, is made from a stretchy Adaptive Fit, Gore-Tex and foam liner that moulds to the foot. Look carefully and you’ll see tabs at the front and rear of the ankle cuff as well as one at the base of the heel. They’re necessary because that inner is quite a snug affair and can be tricky to take on and off, which may get interesting on an alpine start with frozen fingers…

The  inner boot also has its own lightweight rubber sole, so you can use it as a tent or hut slipper as well as just removing it to dry it out. And yes, you got that right, there are two separate Gore-Tex layers in one boot, one in the shape of the integrated gaiter and the other forming the Adaptive Fit inner.

Genius Idea

Overall it looks like a genius concept: speaking as someone who’s climbing partner once got mild frostbite on a south-facing route in the Andes due to his preference for precise, lightweight single boots over clumsy plastics, the idea of a neat, precise, low-volume double boot with better insulation value makes a lot of sense.

At the boot’s press introduction last summer, Arc’teryx told us that it should work in temperatures of down to approximately -20˚C and up to around 5,000m or so, which makes it Alps and, up to a point, Andes friendly.

But here’s the thing, we can’t see any particular reason why it wouldn’t also work in Scottish winter conditions where the removable, fast-drying inner would be brilliant for multi-day mountaineering trips and the snug, supportive fit would be a boon on technical stuff.

Durability?

How durable will it be? Time will tell; boots using integrated gaiters like the Scarpa Phantom range, have tended to be less tough than traditional leather or plastic designs, but as you’d expect from Arc’teryx, the brand has embraced top-end materials and components and put them together with an obsessive emphasis on detail and design, they are impressive things just in terms of pure engineering.

Yes, the £500 price-tag reflects all that, but our first impressions are that these really do offer something that’s markedly different from anything else out there. If you’re looking for a technical mountaineering boot that offers many of the advantages of plastic double boots, but without the downsides, the Acrux AR could be exactly what you’re after.

More Information

See www.arcteryx.com/product.aspx.

The Arc’teryx Acrux AR has three distinct layers: a Gore-Tex integrated gaiter, dense foam shell boot and the stretchy, red, Adaptive Fit Inner.
Toe profile looks promising with protective rand and reinforced crampon ledge to take full clip-on spikes.
Waterproof T-Zip closure tops off full Gore-Tex gaiter.
That inner boot also uses Gore-Tex and can be removed for drying and use as a hut slipper.
Proven Vibram outsole technology and a rubber sole for the inner boot.
Main boot has a conventional lacing system backed up with a Velcro-fastened strap up top.

Share

Newsletter Terms & Conditions

Please enter your email so we can keep you updated with news, features and the latest offers. If you are not interested you can unsubscribe at any time. We will never sell your data and you'll only get messages from us and our partners whose products and services we think you'll enjoy.

Read our full Privacy Policy as well as Terms & Conditions.

production